6.5ft Floor Cord Cover - 15.7in x 5pcs Durable Floor Cable Cover - Floor Cord Protector - Yecaye Low Profile PVC Cord Hider - Flexible Wire Covers for Cords on Floor- W2in H0.5in - Dark Brown

This wire cover set is just what I needed. I have a small music practice space and wanted to cover a 4 ft power cord without having to cut from a large roll and flatten the pieces. These arrived quickly and exactly as expected. They were completely flat - two of the 5 covered my power cable very nicely and lay flat in place. I did not even have to use any tape - which is great because I may move things around the in future. I appreciate the product because it gives me flexibility in use, looks great (see picture I have attached), they work in a small space and are not huge or bulky.

I kind of had my doubts about this product. Being separate pieces and not knowing the shade of brown. I have to say, I’m impressed. The shade is nice and would work for many colors of wood flooring. The pieces all installed very well and you really don’t notice the seams between pieces. The adhesive included works very well. Since they are shipped without being rolled I’m a package, you can immediately install them. The next time I need a product like this, I will definitely order the same product, no need to look at anything else.

We bought a new couch that needed to be plugged in for the recliners and outlets. We weren’t going to have the couch up against a wall on the end so the cords run underneath and come out on one ends and then drape across the floor to the wall. So, I bought this product, which works well and gets the job done of getting cords out of the way and avoiding a tripping hazard. It blends in pretty well with my brown hardwood floor and is easy for people, cats and an iRobot to navigate without trouble. It was, however, a pain to install- took much longer than I thought it would and I had to fight to get multiple cords inserted. I used a box cutter to slit open the two optional slots (there is one main larger space for a thick cord and then two side channels that can be used if needed but they need to be cut opened and are more narrow. You have to get the cords just right to lay flat inside the smaller channels and have to bend the cover a lot to expose the cut channel enough to get the cords in. Once the cords are inside the cover doesn’t slide at all so if you don’t put it on the exact right place along the cord you have to completely undo it and start again. Needless to say it took some trial and error, but in the end I am happy with it and was worth the time to not have loose cords between my couch and the wall in the way of a walking path.

I did not use the adhesive strip because I used it on hardwood floors in the house and wanted to be able to move it to vacuum & mop, but we are very happy with this product. It lays down flat and stays in place even without the adhesive. We purchased one to cover a power outlet cord and we were so happy with it that we purchased two more! These are sturdy and lay flat immediately. Great product at a decent price!

I read through countless reviews of similar products, and most had problems with the product being packaged rolled up, and wouldn't lay flat. This product came not only flat, but in five flat sections. I was initially concerned that the flat extension cord I'd ordered might not fit into what appeared to be a round trough. Installation was a breeze once I figured out to push down on the outside edges of the underside, then the flat cord snapped right into place with just a tiny bit of nudging. I was able to quickly determine how many of the sections I needed (I needed all of them) and I could even slide the cord easily to get just the right length to plug into the wall. The product lays perfectly flat, and had maximum flexibility. Excellent product!

I got this to hide the 12awg speaker wires and power cord that my RoboVac kept getting stuck on. $20 for this. The hole channels are too small. The 12AWG speaker wire is too thick to go through the left or right channels, leaving just the center channel. Which is too small to fit both a 12awg speaker wire + a single power cord. I got it to work, but it wasn't fun and took a lot of elbow greese to stuff both wires in. But guess what, my RoboVac gets stuck on these too! The bumps are too high I guess. While the ramp is too short. I deducted the stars due to the channel being too small for my speaker wire, not for the RoboVac issue.

Did not pay attention to item description when I ordered so was surprised when it arrived to find it was not 1 continuous length, but the sections are sturdy; the joints stay together. I have not applied the 2 sided tape yet until I live with it a while. Good product and recommend. I ran surge protector cord (SJO type of cord) and a CAT 5 ethernet cable through 2 different sections. Happy with it.

I have bought the roll product in the past and know how long it took to finally relax and lay flat. A long time! These, however, are flat in the package and are a joy to have laying flat on the floor and not twisted or gnarly. Our application this time was largely cord concealment and hence we did not fasten them, nor do we walk on them. They just make the cables from the electronics center to the TV disappear along the baseboard. Together with a behind the wall cable kit to the TV, there are no visible cables. The dark brown color and our floor are similar and one has to look carefully to even see these are there.One other point, these are easily slit from the bottom to allow a cable in the two side channels. We have three cables, one in each side and one in the center. The center would handily accommodate another cable.

We looked at several covers but we chose this one as it conplements our floors and looks very nice while being functional.There is 1 section of our rental where we needed 6 cords to cover to prevent tripping and it fit just perfectly for our needs. 4 were regular sized Ethernet cables, 1 was a slimmer Ethernet cable, and 1 was a small power cord. I fit 2 regular cables through the middle channel, and paired 1 regular cable with a slimmer cable for the left of right channels to make it all work (see photos). That is pretty much the maximum this cord cover can handle.The adhesive strips were easy to cut to size and adhere to the back and then to the floor. There was also extra after I finished so that was a bonus. The adhesive has held up nicely except for the area, where I have it along the vertical part of our stairs, it is slipping on the sides. Although, this cover and adhesive were probably not designed to adhere in any other way except flat on the floor (see photos).If you are putting in more than 1 cord, pay attention to how you want the cords to lay on the floor as once you flip it over, they will be on the opposite side.The 1 thing that would make this product better was if the outer channels had pre-cut slits like in the middle channel. It was annoying having to cut them myself and I worried about damaging the other side. It's not straight since I did it myself but that is the side sticking to the floor so not a big deal.I would definitely buy more if the need arises.

it sticks to the ground and nothing will move it. great price.

Perfect for hiding wires and flexible enough so it makes it easy to get the wires in.

Arrived quickly and so far works well

We purchased this product to hide cords that needed to go along the floor to get to a couch. It's a sturdy, well-manufactured cord cover that allows for a few cords to fit in it. As we were installing this on a hardwood floor, I didn't use the double-sided sticky tape. No tripping now! It works very well. UPDATE: I've now purchased a second.